2GIG GC2 - How to Bypass Sensors

2GIG GC2 – How to Bypass Sensors

If you want to arm the system when a sensor is open or activated, you can bypass the sensor by following the steps below.

1. Ensure the desired sensors are open or activated.

2. Press Security.

3. Press Arm.

4. On the bottom of the screen, tap Bypass All.

5. Enter your 4-digit user code.

6. Arm the system to Arm Stay or Arm Away.

When a sensor is bypassed, it will stay on bypass for that arming sequence. After the system is disarmed, the bypassed sensors are automatically taken off bypass.

Manual Bypassing

This is done if the system is already armed and you want to bypass a sensor, or if you want to bypass a sensor that is not currently open or activated.

1. Press Security.

2. Press Menu.

3. Press Toolbox.

4. Enter your 4-digit user code.

5. Select Bypass Sensors.

6. Select the sensor(s) you want to bypass.

7. After all the desired sensors are selected, press Back twice.

8. Arm the system to Arm Stay or Arm Away.

When a sensor is bypassed, it will stay on bypass for that arming sequence. After the system is disarmed, the bypassed sensors are automatically taken off bypass.